本篇文章给大家谈谈linux设备驱动开发学习,以及Linux系统的设备驱动一般分几类对应的知识点,希望对各位有所帮助,不要忘了收藏本站喔。
本文目录一览:
怎么学习嵌入式linux下的驱动编写?
1、编写Linux设备驱动要求工程师有非常好的硬件基础,懂得SRAM、flash、SDRAM、磁盘的读写方式,UART、I2C、USB等设备的接口以及轮询、中断、DMA的原理,PCI总线的工作方式以及CPU的内存管理单元(MMU)等。
2、学习嵌入式Linux驱动,首先我们需要的是去了解整个嵌入式开发的整个流程分为四个层次:底层硬件设计、嵌入式驱动开发、内核开发、应用层开发。
3、写一block驱动, 加上read,write,ioctl,poll等各种函数实现。 简单学习下内存管理, 这个是最难的,明白各种memory alloc的函数实现细节。这是linux开发的基本功。
4、Linux驱动分两块内容:学习硬件工作流程(单片机程序),Linux驱动上层结构 (platform、mtd、字符设备、块设备、网络设备、各种总线 等上层结构)前景大大滴好,但是道路十分之曲折。要有心里准备,得有文火久煨的毅力。
如何玩转linux驱动
1、嵌入式linux上层应用,包括QT的GUI开发 嵌入式linux系统开发 嵌入式linux驱动开发 嵌入式目前主要面向的几个操作系统是,LINUX,WINCE、VxWorks等等 Linux是开源免费的,而且其源代码是开放的,更加适合我们学习嵌入式。
2、第Linux 驱动工程师要有良好的硬件基础。
3、设备文件的的主设备号必须与设备驱动程序在登记时申请的主设备号一致,否则用户进程将无法访问到驱动程序。最后必须提到的是,在用户进程调用驱动程序时,系统进入核心态,这时不再是抢先式调度。
怎样编写Linux设备驱动程序?
驱动程序首先调用函数pci_present( )检查PCI总线是否已经被Linux内核支持,如果系统支持PCI总线结构,这个函数的返回值为0,如果驱动程序在调用这个函数时得到了一个非0的返回值,那么驱动程序就必须得中止自己的任务了。
按照linux下驱动编写规范编写nand flash驱动,可以参考其他已经有的驱动,比如内核源码中已经有的 drivers/mtd/nand/s3c24c 就是个很好的例子。自己以其为模板,实现自己板子的nand flash驱动。
/uclinux/romdisk/romdisk/dev/目录下创建设备:mknod test c 254 0 并且在/uclinux/appsrc/下运行make,生成新的Romdisk.s19文件。
remove,就是和probe对应的,“反初始化”相关的动作。主要是释放系统相关资源和关闭硬件的时钟等常见操作了。
关于linux设备驱动开发学习和linux系统的设备驱动一般分几类的介绍到此就结束了,不知道你从中找到你需要的信息了吗 ?如果你还想了解更多这方面的信息,记得收藏关注本站。